All
Shop Home and commercial EV chargers, and accessories from 7kW single-phase units to three-phase systems. With wide Fast delivery.
Shop by category
-
Loady Pillar 22kW | Type 2 Socket -
Loady Portable EV Charger | Type 2 to Schuko | 6-16A | 5-15m -
Loady Portable EV Charger 11kW | Type 2 to CEE Red | 6-16A -
Loady Portable EV Charger 22kW | Type 2 to CEE Red | 10-32A -
Loady Portable EV Charger 7.4kW | Type 2 to CEE Blue | 10-32A -
Loady Portable EV Charger with Tesla Button | Type 2 to Schuko | 16A -
Loady Type 2 to Type 2 Cable | 22kW | 32A Three Phase | 3-20m -
Loady Type 2 to Type 2 Cable | 11kW | 16A Three Phase | 3-20m -
Loady Coiled Type 2 to Type 2 Cable | 22kW | 32A Three Phase | 5-15m -
Loady Coiled Type 2 to Type 2 Cable | 11kW | 16A Three Phase | 5-15m -
Loady Type 2 to Type 2 Cable | 7.4kW | 32A Single Phase | 3-15m -
Loady Type 2 to Type 2 Cable | 3.7kW | 16A Single Phase | 5-15m -
Loady Type 1 to Type 2 Cable | 7.4kW | 32A Single Phase | 5-15m -
Loady Type 1 to Type 2 Cable | 3.7kW | 16A Single Phase | 5-15m -
Loady Replacement Charger Cable | Type 2 to Open End | 22kW | 5-15m -
Loady Replacement Charger Cable | Type 2 to Open End | 11kW | 5-15m -
Loady Replacement Charger Cable | Type 2 to Open End | 7.4kW | 5-15m -
Loady CCS2 DC Charger Cable | Open End | 150A-375A | 5m -
Loady U-Hook Charging Cable Holder | Powder-Coated Steel -
Loady Portable Charger & Cable Holder | Holds up to 45kg -
Loady Charger Mounting Pole for Easee | Single or Double | 149cm -
Loady Charger Mounting Pole for Tesla Wall Connector Gen 3 | Single or Double | 149cm -
Loady Charger Mounting Pole for Zaptec Go & Go 2 | Single or Double | 149cm -
Loady Charger Mounting Pole for Wallbox Pulsar Max | Single or Double | 149cm
Common Questions
Do I need a professional to install my EV charger?
Yes - all home EV charger installations in the UK must be carried out by an OZEV-approved electrician. It's not just best practice, it's a legal requirement under BS 7671 wiring regulations. The charger also won't be eligible for the government grant unless an approved installer fits it.
Can I claim the OZEV grant when buying through ON-EV?
Yes. The OZEV EV Chargepoint Grant gives eligible homeowners up to £350 off the cost of buying and installing a home charger. To qualify you need to use an OZEV-approved installer - the grant covers both the unit and the labour. Your installer will usually handle the application for you.
What's the difference between a tethered and untethered charger?
A tethered charger has a cable permanently attached - you just unclip and plug in. Untethered has a socket so you supply your own Type 2 cable. Most home users prefer tethered for convenience. Untethered suits you if you drive more than one EV or want a cleaner look when the car isn't plugged in.
What's the difference between a 3.6kW and 7.4kW charger?
A 7.4kW charger is roughly twice as fast - 60kWh battery takes around 8 hours on 7.4kW vs 16 on 3.6kW. Most modern EVs and UK homes can handle 7.4kW on a standard single-phase supply, so unless your car or electrical setup limits you, go for the 7.4kW. It's the more future-proof option.
Do I need planning permission for a home EV charger?
In most cases, no. Home EV chargers fall under permitted development in the UK. The exceptions are listed buildings and some flats - if your property falls into either of those, check with your local authority before ordering.
Can I use my EV charger with solar panels?
Yes, and it's a great combination. Solar-compatible chargers like the Myenergi Zappi can detect excess energy from your panels and automatically divert it to charge your car - so instead of exporting it back to the grid, you're charging for free. If you have or are planning solar, look at our solar compatible range.
